sales@cnkosun.com    +86-577-88309853
Cont

Máte nějaké dotazy?

+86-577-88309853

Mar 28, 2022

Úvod k výkonu a principu extrakční nádrže

The extraction tank is a commonly used leaching and extraction equipment in the pharmaceutical and chemical industry, and is especially suitable for the leaching and extraction of the components contained in the plant products. The structure has a tank body, a screw propeller or a propeller propeller with an axial position device in the tank body, and is connected with the rotating shaft disk outside the tank body, and it is characterized in that it has a set of continuous countercurrent leaching and extraction single tanks which are inclined horizontally, and the tank is separated from each other. The feed port is connected with the feed port to form a communication device. The upper part of the low end of each single tank has a feed port, the lower part has a residual liquid discharge port, the upper part of the high end of the tank body has a liquid inlet or exhaust port, and the lower part has an outlet port. Feed mouth.

Představení představení

The extraction tank is a multi-purpose equipment designed for traditional Chinese medicine factories, boiling and extraction processes. It can extract, recover alcohol and separate volatile oil in this process. In addition to the main equipment of the extraction tank, this equipment is also equipped with a foam catcher, a cooler, an oil-water separator, etc. All parts of these devices in contact with drugs are made of stainless steel, and the heating interlayer is strictly tested by the pressure vessel inspection department. In the extraction process, the equipment is composed of condenser, oil-water separator, etc., and is completed in a completely sealed recyclable system, and at the same time, the organic solvent is recovered from the waste residue.

Princip extrakce

(1) jako je extrakce vody: voda a tradiční čínská medicína se naplní do extrakční nádrže a spustí se mezivrstvový zdroj tepla. Po varu v nádrži se přívod zdroje tepla sníží a var v nádrži zůstane zachován. Doba údržby je stanovena podle extrakčního farmakologického procesu. Voda, pára je ochlazena a vrácena do extrakční nádrže k udržení cirkulace a teploty.

(2) jako je extrakce alkoholu: nejprve přidejte lék a alkohol do nádrže a ta musí být utěsněna, dejte do mezivrstvy zdroje tepla páru, otevřete chladicí vodu, aby se snížila dodávka zdroje tepla, když nádrž dosáhne požadované teploty a aby se stoupající pára alkoholu po průchodu kondenzátorem vrátila na kapalný alkohol To znamená, že pro zvýšení účinnosti lze čerpadlo použít pro nucený oběh, takže tekutý lék je odsáván ze spodní části nádrže přes čerpadlo a vrátilo se do nádrže horním vstupem válce, aby se uvolnil tok místního kanálu.

(3) Extrakce oleje: nejprve přidejte tradiční čínskou medicínu a vodu obsahující těkavý olej do extrakční nádrže, otevřete cirkulační ventil odlučovače oleje, nastavte obtokový zpětný ventil a otevřete chladicí vodu pro chlazení, když ventil zdroje tepla dosáhne teplota těkání. Tekutý lék by měl být v odlučovači udržován v určité výšce, aby se oddělil, a střídavě by se měl používat jiný odlučovač oleje-vody.

(4) Regenerace oleinu: Přidejte alkohol do válce, zapněte chladicí vodu pro páru a poté otevřete regenerační ventil.

 


Odeslat dotaz